Improve your cell signal for all US carriers inside any home, cabin, small building or office up to 3,000 square feet. Flare 3.0® takes the multi-award winning SureCall Flare model one step further to deliver even more cellular reliability to homes in remote areas.
Flare 3.0 comes kitted with a Yagi-directional antenna and an average 9 dB increase in uplink power for the frequencies that are most commonly used in rural areas. Together, the increased uplink and upgraded antenna pack the Flare 3.0 with 8X more connecting power for homes and offices in the most challenging signal locations.
Features:
- Coverage area*: up to 3000 square feet
- All-in-One Kit? YES
- Compatibility: This amplifier supports 700mhz/800mhz/1700mhz/1900mhz/2100mhz networks (which includes most 2G, 3G, and 4G providers in the US). Supported carriers/networks
- include:
Verizon 2G/3G/4G/AWS
- Sprint 2G/3G/4G - 4G LTE will only be improved where Sprint is using the 1900mhz band. This amplifier does NOT support Sprint's 2500mhz LTE band
- AT&T 2G/3G/4G/LTE
- US Cellular 2G/3G/4G
- T-Mobile 2G/3G/4G
- MetroPCS 2G/3G/4G
- For other carriers, confirm which frequency your provider is using and make sure this amplifier supports it before purchasing! Contact us if you need any assistance.
- Improves cell service for all US carrier’s voice, text and 4G LTE data signals
- Increases signal strength & extends battery life for multiple users on all cellular devices, up to 3,000 sq ft
- Significantly improved uplink power and high-gain Yagi antenna for best performance in the toughest environments without sacrificing performance in urban locations
- Newly added gain expands indoor cell coverage for those located at the edge of the network
Specifications:
- Frequency: Uplink: 698-716/776-787/ 824-849/1850-1915/1710-1755; Downlink : 728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155
- Impedance: 75 ohm
- Average Gain: Cellular-65dB / PCS-72dB / LTE(A)-63.5dB / LTE(V)-64dB / AWS-71dB
- Maximum Gain: Cellular- 65dB / PCS-72dB / LTE(A)-63.5dB / LTE(V)-64dB / AWS-71dB
- VSRW: ≤2.0
- Standard Supported: CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards
- AC Power Transformer: Input AC 110-240V, 50/60 Hz
- Maximum RF Output Power: 1 Watt EIRP
- Noise Figure: 7dB
- Cable: RG6
- RF Connectors: F-Female
- Power Consumption: <12W
- Dimensions (amplifier): 5.125" × 7.25" × 5.625"
- Weight: 1.81 lb (amplifier)